
800-777-0703 I DXENGINEERING.com
23
Antenna Tuners
AT5K 3,500 Watt Antenna Tuner
Nicknamed the “Rock Crusher,” this American-
made Palstar AT5K 3,500 Watt Antenna Tuner
delivers an impressive 3,500 watts single
tone continuous with low losses, and 5,000
watts PEP performance at certain impedance
ranges. The AT5K tuner o ers a wide impedance tuning range from
1.8 through 22 MHz with limited impedance tuning from 22 to 29.5 MHz.
The AT5K tuner provides balanced output with a high power 5,000 watt PTFE cable balun
at the input of the tuner circuit. When the network is properly tuned, a 50 Ω impedance
will be presented to the input and output of the balun for maximum e iciency. This tuners
is designed to handle both balanced line feeds and unbalanced coax feedlines.
• Fan-cooled for extended 100% duty cycle operation
• Full-performance T-match circuit, impedance matching from 8 to 2,000 Ω
• Custom large value variable capacitors, 600pF at 6 kV
• 10 amp silver plated ceramic body roller inductor handle-driven crank
• 11-gauge aluminum chassis, powdercoated on front and top
• Power connector and cable included
PAS-AT5K 3,500 Watt Antenna Tuner ...............................................$1,145.95
AT4K 2,500 Watt Antenna Tuner
The legendary AT4K 2,500 Watt Antenna
Tuner built the Palstar reputation for high
quality and durability. Updated for the 21st
century, the AT4K now has a switchable,
dual-movement active peak and peak hold
wattmeter. The selection between unbal-
anced or balanced output is relay-switched
with a front panel control on the AT4K.
The AT4K T-matching network uses a 1:1 unbalanced-to-balanced transformer in the input
of the network. When the network is properly tuned, an impedance of 50 Ω is presented to
the input and output of the balun.
• T-match circuit with impedance matching range from 8 to 2,000 Ω
• Custom large value variable capacitors, 460pF at 6 kV
• 10 Amp silver plated ceramic body roller inductor handle-driven crank
• 11-Gauge aluminum chassis, powdercoated on front and top
PAS-AT4K 2,500 Watt Antenna Tuner ..................................................$865.95
AT2KD Di erential Antenna Tuner
Palstar’s AT2KD Di erential Antenna Tuner is
American-made, with impedance-matching
networks that optimize the performance of
your antenna with your transceiver or SWL
receiver. It o ers 160 through 6 meter band
coverage and handle up to 2,000 watts PEP
power. Simply put, the AT2KD is the highest
quality di erential-T antenna tuner on the market!
This tuner has two impedance-matching controls with a 6:1 Vernier reduction drive for
capacitor tuning with precision and accuracy. A turns counter-indexed inductor crank
handle makes coarse tuning adjustments easy. Using a T-type circuit configuration makes
adjustments simple because it reduces the number of knobs and eliminates false peaks. A
12 Vdc power connector and cable are provided for the meter circuit for each tuner.
• Input tuning: 5 kV dual-stator di erential capacitor (430pF/13pF/430pF)
• Inductance: 25 uH roller inductor; 12-gauge wire wound on steatite ceramic core,
silver plated bar/wheel
• Frequency coverage: 1.8-54 MHz
• Power: 2,000 W PEP SSB, 1,500 W single tone
• Impedance range 20 to 1,500 Ω, 1.8-30 MHz lower power for lower Z range
PAS-AT2KD Di erential Antenna Tuner ................................................. $499.95
AT2K 2,000 Watt Antenna Tuner
Building upon Palstar’s impressive
AT1500CV tuner, this AT2K 2,000 Watt
Antenna Tuner features a new, smaller
roller inductor, allowing the AT2K to
tune from 160 meters to 6 meters. It
can match dipoles, center fed doublets,
Verticals, end-fed wire, delta loops, beams,
Windoms, inverted v ees, and many more antenna types.
The AT2K features a 6-position antenna selector switch and Peak/Peak Hold metering in
two ranges, 300 and 3,000 watts. Standing Wave Ratio measurements are displayed with
this illuminated cross-needle meter. Its chassis is made of 11-gauge aluminum with a
powdercoated finish on the front and top cover.
• Impedance range 20 to 1,500 Ω from 160 to 6 meters (assuming resistive load)
• Low minimum custom variable capacitors, 15pF to 400pF at 4.5 kV
• 26 uH 5 kV ceramic body roller inductor with turns counter
• Silver plated inductor wheel sha and contact wheel
PAS-AT2K 2,000 Watt Antenna Tuner ..................................................$498.95
600 Watt IntelliTuner™
Automatic Antenna Tuner
This tuner lets you rapidly tune
any antenna—unbalanced, single-
wire or balanced (with an external
balun)—automatically. The tuner
includes a highly e icient switching
L-network with wide matching capability, 1.8 to 30 MHz coverage,
cross-needle power meters, a port for an accessory remote control, a
radio interface port, and heavy-duty 16 amp/1,000-volt relays. It is rated at
600 watts PEP SSB and 300 watts CW.
MFJ-994B ................................................................................................................$339.95
PAS-AT5K-HP 3,500 Watt Antenna Tuner
If you’ve already got a high quality meter and balun, but
still want the high powered tuning ability of the AT5K,
than this is the ideal solution. It has the same great specs
of the AT5K, but without redundant features. This makes
it easier on your wallet. You still get the legendary “Rock Crusher” performance.
PAS-AT5K-HP 3,500 Watt Antenna Tuner ...............................................$1,045.95
PAS-AT-500 600 Watt Antenna Tuner
This compact manual tuner covers the 160 through
6 meter bands. Controls are easy-to-use and intuitive. Just
like its higher power-rated counterparts, the AT-500 gives
you a six-position switch to select from multiple feedlines
and an external dummy load. It handles 600 watts PEP
and 500 watts CW, with an impedance matching range
of 20 to 1,500 Ω. A 4:1 ferrite current balun handles the
balance line feeder and a 12 Vdc power connector (with
cable) is included.
PAS-AT-500 600 Watt PEP Antenna Tuner ............................................. $479.95
PAS-BT-1500A
1,500 Watt Double L
Balanced Antenna Tuner
The BT1500A is the ONLY 1,500 watt
double-L network antenna tuner on the market today.
With two tandem mounted ceramic roller inductors,
this tuner o ers unparalleled precision. If you’re
looking for a balanced tuner, this is a great high-power
solution. The BT1500A is a highly specialized tuner, so be
sure that it suits your application. Find the complete specs at DXEngineering.com.
PAS-BT1500A 1,500 Watt Double L Balanced Antenna Tuner ................. $699.95
PAS-AT1500HB
RF Matching Network
If you do a lot of contesting, then you’re changing
frequencies o en. This RF Matching Network makes
things easier, allowing you to rapidly QSY from one band
to another or between preset low SWR points in a single
band. You can use several of these di erential T-type
tuners to create a versatile high-band antenna system.
The AT1500HB can handle 1,500 watts and features a wide skirt control knob and fan
cooling. For the complete specs on this and every Palstar product, visit DXEngineering.com.
PAS-AT1500HB RF Matching Network .......................................................... $429.95
3 kW Edge Roller Antenna Tuner
This high power antenna tuner has a
roller inductor “T” matching network
that continuously tunes all frequencies
from 1.8 through 30 MHz. It also features
a built-in 3 kW peak or average detecting
directional power meter. There are rear
panel connectors for coaxial and wire feedlines. A heavy-duty, high-voltage insulated,
current-type balun allows use with balanced feedlines.
AME-ATR-30 ..............................................................................................................$559.95
HF-AUTO 1,500 Watt
Automatic Antenna Tuner
Palstar is taking the low-power auto-tuner to the
next level with the HF-AUTO. This unit uses quiet,
continuously variable components to create a perfect
antenna match, without noisy relays. It can tune with a mere 2 watts of power, yet can
handle 1,500 watts. The HF-AUTO covers 1.8 through 54 MHz, tunes within 6 seconds and
has a large, backlit LCD for easy readout of RF power, SWR, frequency and more. All the
details on this American-made auto-tuner can be found at DXEngineering.com
PAS-HF-AUTO 1,500 Watt Automatic Antenna Tuner .....................$1,445.95
Commenti su questo manuale